Seifert Variable Speed Air Conditioner KG 2025-24V Manuel d'utilisateur télécharger pdf (Page 14)

EN 14

4. Mounting and operational start-up

Danger

Danger from electrical voltage

The unit must be mounted by specialist personnel (qualified electricians). The

personnel must ensure that the cabinet is disconnected from the electrical

supply for the duration of the mounting operation. Therefore take the cabinet

out of operation, following the relevant instructions before mounting work

commences.

Attention

Danger through incorrect work on the unit.

Only specialists are allowed to put the unit into operation.

4.1 Mounting preparations

Several points must be checked before the unit can be mounted. These checks must be made to

ensure safety and the trouble-free operation of the unit. These checks must be carried out with

absolute thoroughness to ensure that the unit works perfectly.

Transport damage check

On delivery the carton containing the unit must be examined for signs of transport damage. Any

transport damage to the carton could indicate that the unit itself has been damaged in transit which in

the worst case could mean that the unit will not function.

Location and space requirements

The location of the cabinet must allow for sufficient air circulation to and from the unit.

Attention

Damage to the unit through incorrect mounting.

The unit must be mounted vertically. The compressor operates properly when

it is oriented within ±35° of vertical, but condensation management should be

taken care of. The compressor can operate in more extreme conditions, but it

should not be permanently operated in these conditions.

Air apertures

To provide adequate air circulation and avoid temperature layers from forming, ensure that:

• air inlet and

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Pas de commentaire

Seifert Variable Speed Air Conditioner KG 2025-24V Manuel d'utilisateur Page 14